Every household once in a while needs a good clear out. We all seem to accumulate so much junk over long periods of time its a wonder that we dont sometimes end up sinking beneath it all. Often, the most cost effective solution for clearing out all of your junk is to hire a skip, rather than make lots of trips to the local tip.

Additionally it is increasingly common that these days many of the better skip companies will segregate your waste for recycling rather than just tipping it in landfill. There are several advantages to this, firstly it will ease your conscience as you are helping the planet rather than pollution it, but also, you are saving future resources through your recycling.

When skips are full, the company will come and collect them and all of the waste will be taken to a sorting pad to be separated. Once all of the wood, plastic, metals, glass etc. have been separated from each other, they are then stored in bulk for commercial processing later on. The hire of the skip costs the customer no more than a traditional skip that would just empty it all to landfill, and the company makes up for the extra labour costs by selling the resources taken from the skips on to production line companies.

It can often be tricky trying to work out how big you will need your skip to be. It is always best to opt for one slightly larger than you anticipate rather than to fill one and not have the room for all of your waste.

You can also order lockable skips to prevent fly tippers from filling your skip for you. It is an age old problem that has caused many arguments between neighbours since time began, but there is nothing more irritating than paying for a skip and having someone in essence steal it from you. For this reason, lockable skips are a huge boon and will help you to relax.

If you intend to have the skip parked in the street you will need to obtain a street permit from the council. Your skip company should be able to do this for you without any additional charge or problems, they will also ensure that the skip is coned off and has suitable night lights. Complying with local health and safety is vital as you could find yourself liable if an accident were to occur.

Everyone is familiar with cupboards, attics and drawers being so full of junk that you cant fit anything in them any more and every now and then, every house needs a good clean-out of all the junk thats been accumulated over the years. Usually, the most cost effective way of doing that is to hire a rubbish skip, and throw it all out into one conveniently placed container rather than drive back and forth to the local tip.

Additionally it is increasingly common that these days many of the better skip companies will segregate your waste for recycling rather than just tipping it in landfill. There are several advantages to this, firstly it will ease your conscience as you are helping the planet rather than pollution it, but also, you are saving future resources through your recycling.

When skips are full, the company will come and collect them and all of the waste will be taken to a sorting pad to be separated. Once all of the wood, plastic, metals, glass etc. have been separated from each other, they are then stored in bulk for commercial processing later on. The hire of the skip costs the customer no more than a traditional skip that would just empty it all to landfill, and the company makes up for the extra labour costs by selling the resources taken from the skips on to production line companies.

It can often be tricky trying to work out how big you will need your skip to be. It is always best to opt for one slightly larger than you anticipate rather than to fill one and not have the room for all of your waste.

Lockable skips are available from most companies and these are a great way of preventing people from fly tipping, i.e. filling your skip with their own junk. It is a problem as old as skips themselves but it can now be stopped by lockable skips.

If you intend to have the skip parked in the street you will need to obtain a street permit from the council. Your skip company should be able to do this for you without any additional charge or problems, they will also ensure that the skip is coned off and has suitable night lights. Complying with local health and safety is vital as you could find yourself liable if an accident were to occur.

Manufacturing Design Engineers often design parts out of stock material, metal parts that in practicality would be more efficiently and cost effectively produced as an Investment Casting. This happens because of the familiarity and abundance of machining facilities compared to the relatively small quantity and less understood advantages of Investment Casting operations. Similarly, the conversion of fabrications to castings is often a logical transition for many complex fabrications. In that never-ending quest to increase efficiencies and lower costs, companies are discovering the value Investment Castings can bring to their product lines.

SPOKANE INDUSTRIES specializes in bringing near net shape casting production to the marketplace through our Precision Investment Castings Division. SPOKANE PRECISION CASTINGS can minimize dimensional tolerances without machining or other subcontracting methods so that you may have a finished product ready for rapid assembly. Were able to produce parts that weigh from 80 pounds to as little as a few grams. In many cases, injecting multiple pieces or several different parts in a single die saves additional operations and reduces costs.

SPOKANE PRECISION CASTINGS offers an almost endless array of alloys. Precipitation Hardening Alloys, Carbon Steels, Low Alloy, 17-4, Tool Steels, Silicon Brass, 300 and 400 Series Stainless Steels, and most other air melts are common. We offer an endless number of commercial applications from the dental, military, food, automotive, and oil industries, to name a few. Our real forte is to get involved at the engineering genesis by taking multiple metal components that may currently be machined or fabricated and design them together. We can then create a single near net shape casting. This eliminates multiple operations, saves money, time and energy - to bring savings to the bottom line for our customers.

Converting fabrications to castings brings a multitude of benefits to a manufacturer. Investment Castings can oftentimes be designed with less material, much stronger, creating less weight and at the same time lower failure rates. In addition, a single casting can often times be designed to do the entire job where there are multiple parts creating a fabrication. This results in assembly lower overhead, time savings, simplified workflow and improves uniformity and aesthetics.

SPOKANE PRECISION CASTINGS cross-trains its workforce to a high degree. Employees are encouraged to move from department to department throughout our production areas where strong visual and written controls facilitate process standardization. SPOKANE PRECISION CASTINGS has implemented many Lean Manufacturing processes where continuous improvement is ongoing and reducing variables ultimately drives lower costs.

SPOKANE PRECISION CASTINGS is augmented by in-house capabilities including full dimensional layout, machining, x-ray, spectrometer and Non-Destructive Testing of mechanical properties. We also perform Magnetic Particle Inspection, liquid penetrant and utilize heat-treat facilities both contractually and internally.

SPOKANE PRECISION CASTINGS has been part of the Spokane Industries family for 18 years. SPOKANE INDUSTRIES, its parent company, has been in the foundry industry since the 1952. This offers full access to a large and diversified engineering department with the latest in CAD/CAM and Flow Test Analysis. We accept a large array of electonic files as well as your CAD/CAM files so that we can rapidly prototype and meet your specifications and schedules.

Jeff Kuntz, Spokane Precision Castings Production Manager states, SPOKANE PRECISION CASTINGS has been working with industries from military grade castings ” like Class II Armor Certified, to dental equipment castings with high esthetic appeal. Were accustomed to producing quantities that range from low volume/high variety to commodity products that range up to 80 thousand Investment Castings every month. Our goal is to exceed the customers expectations at every opportunity.

The combination of all of our in-house capabilities along with some local strategic partners help us stand alone in the marketplace and adds to our ability to help our customers meet their ever changing needs. Starting with our customers drawings and vision, we strive to meet all of your Investment Casting needs.

Bottom line ” faster R & D, first articles get to you faster and ultimately saves you time and money. Isnt that what its really all about?